Matek Systems F722-STD STM32F722 F7 Flight Controller Built-in OSD BMP280 Barometer Blackbox for RC Drone
Rated 3.5/5 based on 11 customer reviews

Matek Systems F722-STD STM32F722 F7 Flight Controller Built-in OSD BMP280 Barometer Blackbox for RC Drone

Available: In Stock
Wishlist Compare
$46.78
Image
  • Order within
Matek Systems F722-STD STM32F722 Flight Controller Built-in BetaFlight OSD BMP280 Barometer Blackbox

Specification(User manual):
Brand name: Matek Systems
Item name: F722-STD flight controller
36x36mm PCB with 30.5mm mounting holes
Weight: 7g
MCU: 216MHz STM32F722RET6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
PPM/UART Shared: UART2-RX
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
Camera control: Yes
DAC: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

Features:
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
7x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
1x I2C1
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection

Package included:
1x F722-STD flight controller
2x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs
 

 
 

,,,,,,,
Matek Systems F722-STD STM32F722 Flight Controller Built-in BetaFlight OSD BMP280 Barometer Blackbox

Specification(User manual):
Brand name: Matek Systems
Item name: F722-STD flight controller
36x36mm PCB with 30.5mm mounting holes
Weight: 7g
MCU: 216MHz STM32F722RET6 IMU: 32K ICM20602 gyro/accelerometer (SPI) Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 PPM/UART Shared: UART2-RX Battery Voltage Sensor: 1:10 Current Sensor: No (FCHUB-6S, FCHUB-VTX option) BEC 5V: No (FCHUB-6S, FCHUB-VTX option) LDO 3.3V: Max.300mA I2C1 SDA & SCL: Yes Camera control: Yes DAC: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes

Features:
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 7x PWM / DShot outputs without conflict 5x UARTs 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 1x I2C1 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x Side-press button for BOOT(DFU) mode 1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection

Package included:
1x F722-STD flight controller
2x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs
 

   
,,,,,,,