Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF

Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF

Availability: In Stock
  • Vendor:Drone 4 Racing
  • Category: BNF Drone Racing, BNF Racing Drone (Bind-n-Fly and Almost Ready-to-Fly), Combo Drone, FPV Drone Racing ESCs, FPV System - Buy FPV RC Acessories & Parts at Drone4Racing, happymodel, Parts & Accessories, RTF (Ready to Fly)
$86.99
Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF
Happymodel Snapper7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF











Specification:
Brand Name: Happymodel
Model: Snapper7
Item Name: 75mm WheelbaseÚÊ 1S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package lipo battery and charger

Receiver: Compatible Frsky D8 ReceiverÚÊ ORÚÊ
ÚÊ ÚÊ ÚÊ ÚÊ ÚÊ ÚÊ ÚÊ ÚÊ Compatible FlyskyÚÊAFHDS/ÚÊ AFHDS-2AÚÊReceiver ( Optional)

Size: 98.5mm*98.5mm*36mm
Weight: 28g (without battery)

Crazybee F3 Flight Controller
Item Name: Crazybee F3 FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 (SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)
ÚÊ
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver Or Flysky Receiver
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
ÚÊ
Firmware:ÚÊ Betaflight_3.3.0_Crazybee
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Heading LED Ready
ÚÊ
Onboard 5A 4 In 1 ESCÚÊÚÊ

Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Motor connector: JST PH1.25 3pin
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM
ÚÊ
Onboard Frsky Receiver Version ( Optional)

SPI BUS receiver
Frsky D8
Compatible both of Non EU and EU LBT transmitter
Channels: 8CHÚÊ
Failsafe support
No ground interferenceÚÊ ( Transmitter and receiver 1 m from the ground) : 300m
ÚÊ
Onboaed Flysky Receiver Version ( Optional)

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch (AFHDS)ÚÊor 14ch (AFHDS-2A)
No ground interference (Transmitter and receiver 1 m from the ground):ÚÊ300m
Failsafe support
ÚÊ
SE0703 19000KV MotorÚÊ

Model: SE0703
KV: 19000KV
Configu-ration: 9N12P
Stator Diamter: 7mm
Stator Length: 3mm
Shaft Diameter: Ø?1.0
Motor Dimension (Dia.*Len) : Ø?10*14.5
Weight: 2.5g
No.of Cells: 1S Lipo
ÚÊ
Propeller
40mm 3-blade Propeller ( 4 CW + 4 CCW)
ÚÊ
5.8G VTX AIO CameraÚÊ
5.8G 48CH 25mW VTXÚÊ
Output Power: 25mW
Frequency: 48CHÚÊ
With Raceband:ÚÊ5474-5945 MHZ
Input Voltage: 3.3V-5.5V
Current Consumption: 300mA (type)

700TVL Camera
Camera Resolution: 700TVL
Field of View: 120Ú?
Video Format: NTSC
Antenna: RG178 antenna
Size: 13.9x12.0mm( LxW)
Weight: 3g
ÚÊ
ÚÊ3.8V 450mAhÚÊLipo Battery

Capacity: 450mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60x18x7mm
Weight: 13.6g
Connector: PH2.0
ÚÊ


Features:
- Betaflight support, multi flight mode: ACRO/AIR/ANGLE
- Powerful Brushless motor and Smooth ESCÚÊ
- CNC aluminum alloy propeller guardÚÊ
- Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
- Adjust the settings and the PID of the flight controller via OSD
- Frsky version support both EU LBT and NON-EU Frsky transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version

Package Inlcuded:
Basic Version
1xÚÊSnapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
1x 3.8v 450mah 30C/60C Lipo battery
1xÚÊUSB Lipo/LIHV Charger

1xÚÊPropeller Disassemble Tool
1xÚÊScrewdriver

Standard Version
1xÚÊSnapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
3x 3.8v 450mah 30C/60C Lipo Battery
1xÚÊ
1S06 6 Way Lipo/LIHV charger

1xÚÊPropeller Disassemble Tool
1xÚÊScrewdrive