Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 72CH 30A Dshot600 800TVL iRangeX iRX-i6X RTF

Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 72CH 30A Dshot600 800TVL iRangeX iRX-i6X RTF

Availability: In Stock
  • Vendor:Drone 4 Racing
  • Category: Combo Drone, FPV System - Buy FPV RC Acessories & Parts at Drone4Racing, RTF (Ready to Fly), RTF (Ready to Fly)
Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 72CH 30A Dshot600 800TVL iRangeX iRX-i6X RTF
Eachine Wizard X220S Omnibus F4 5.8G 72CH VTX 30A BLheli_S Dshot600 ESC 800TVL Camera With 30Ú? Runcam3/Gopro Session Camera Mount

Dear customers,
Attention please.
1. Some of the X220S RC drone will come with XF5804 5.8G 48CH VTX, this would not effect on its use, please take it easy.
2. The first 500 items of Eachine Wizard X220S come with iRangeX iRX-i6X remote control and iR-A8S receiver, after the first 500 items it will come with Flysky FS-i6X remote control and FS-A8S receiver.
Both of the iRX-i6X and FS-i6X are compatible with iR-A8S and FS-A8S.
3.ÚÊThe flexible glue anti-vibration motor pad may cause the motor to slip, please check and tighten the screws before flying.
Best regards,


Item Specification
EachineÚÊWizardÚÊ X220S
Wheelbase: 220mm
Frame arm: 4mmÚÊcarbon fiber
Weigh:ÚÊ356gÚÊ(withoutÚÊbattery and camera mount)
PackageÚÊweigh: 1728g
3K carbon fiber frame kit,ÚÊ4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30Ú? camera mount for Runcam 3 Gopro session.ÚÊ
Anti-vibration sponges to protect the racer frome crashing.
Eachine ÚÊMN2206 2300KV motor

KV: 2300
Max thrust:ÚÊ1100G
NO.OF cell:ÚÊ3-5S
Propeller:ÚÊ5 inch
Eachine 30A BLHELI_S ÚÊ4 in 1ÚÊESC
Con. current:ÚÊ30A
Peak current (10S):ÚÊ35A
Input ÚÊvoltage:ÚÊ2-5S
BEC:ÚÊ5V output
Size: 36*36MM
Eachine 1179 800TVL CCD cameraÚÊ
Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980HßÑ1080 (2MP)ÚÊ
Format: PAL
Video output: 1.0Vp-p/75Ø?
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lensÚÊ
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20âÁ?--60âÁ?
Humidity: 0%~98%ÚÊ
Strong backlighting effect
5.8G 72CHÚÊ25MW 200mw 600MW
switchable transmitter

Video Format ÚÊ: NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85âÁ?
Connector: RP-SMA Female
Antenna connector: RP-SMA Male

Omnibus F4 V3ÚÊflight controller
Size: 36x36mm
Mount holes: 30.5x30.5mm
STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.ÚÊ
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.ÚÊ
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
With barometer
SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the FC.
Supported by BETAFLIGHT and dRonin
iRangeX iRX-i6X /ÚÊFlysky FS-i6XÚÊ2.4GHz 10CH remote control

Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Chargeable: No
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
On-line Update: Yes
Color: Black
Certificate: CE0678, FCC ID: N4ZFLYSKYI6X
iRangeXÚÊiR-A8S /ÚÊFlysky FS-A8SÚÊreceiver

Channels: PPM 8CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
Band width: 500KHz
Band number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM
Transfer method: FHSS
Data output: 1.5mm*3 Pin ÚÊPPM
Antenna length: 26mm (Not including brass contacts)
Input power supply: 4.0-8.4V
Display method: LED
No ground interference ( Transmitting and receiving 1 mÚÊfrom the ground): >300m
Working current: 40mA
Each channel data: depend on theÚÊtransmitter
Channel delay: <15mS
Size: 20*14*5.3mm
Weight: 1.2g
Certificate: CE0678, FCCID: N45ZA8S00
1500mAH 4S 14.8V 75C battery

Capacity(mAh) : 1500
Cells (s): 4
Weight (g): 177
Length(mm): 80
Width(mm): 30
Height(mm): 33
Connector: XT60
Eachine 5051 3-blade propeller
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

Eachine wizard X220S FPV drone english manual

Package included:
1 x EachineÚÊWizard X220S frame kit
1 xÚÊiRangeX iRX-i6X /ÚÊFlysky FS-i6XÚÊremote control
1 xÚÊiRangeXÚÊiR-A8SÚÊ/ÚÊFlysky FS-A8SÚÊreceiver
2 x 2206 2300KV motor CWÚÊ
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S ÚÊ4 in 1 ESC
1 x Omnibus F4 V3 flight controller
1 xÚÊ800TVL cameraÚÊ
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 xÚÊ1500mAH 4S 14.8V 75C battery
1 x 30Ú? Camera Mount(For Runcam3/Gopro session)
1 x B3 Pro charger
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
(Package doesn't include Runcam 3, the Runcam 3 on the pictures for reference only.)