Happymodel Snapper6 65mm Micro 1S Brushless FPV Racing RC Drone w/ F3 OSD BLHeli_S 5A ESC BNF
Rated 3.5/5 based on 11 customer reviews

Happymodel Snapper6 65mm Micro 1S Brushless FPV Racing RC Drone w/ F3 OSD BLHeli_S 5A ESC BNF

Available: Out of Stock
Wishlist Compare
$81.89
Successful pre-order.Thanks for contacting us!
Happymodel Snapper6 65mm Micro 1S Brushless FPV Racing RC Drone w/ F3 OSD BLHeli_S 5A ESC BNF 
 
Description:
Brand name: Happymodel
Item name: Snapper6 FPV racing Drone
Wheelbase: 65mm
Basic version: with one battery and one USB Lipo/LIHV charger
Standard version: with 3 batteries and one 1S06 6 way Lipo/LIHV charger
Receiver: Compatible Frsky receiver / Compatible Flysky Receiver / Compatible DSMX DSM2 Receiver
Size: 81mm*81mm*36mm

Items  Specifications
SE0603 19000KV brushless motor

Configu-ration: 9N12P
Stator diamter: 6mm
Stator length: 3mm
Shaft diameter: Φ0.8mm
Motor dimension(Dia.*Len): Φ9mm*15.5mm
Weight(g): 1.7g
No.of cells(Lipo): 1S
 
Crazybee F3 flight controller

Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry (D8/D16 switchable)
Built-in Betaflight OSD (SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through ready
Heading LED ready
 
BLHeli_S 5A 4 in 1 ESC

Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600
 
Frsky receiver version

SPI BUS receiver
Frsky D8/D16 switchable
Compatible both of Non EU and EU LBT transmitter
Channels: 8ch or 16ch
Failsafe support
No ground interference (Transmitter and receiver 1m from the ground): 300m
 
Flysky receiver version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference (Transmitter and receiver 1m from the ground): 300m
Failsafe support
 
AIO Camera & VTX

Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With raceband: 5474 5945 MHZ
Size: 13.9"12.0mm (L*W)
Weight: 3g
 
3.8V 250mAh Lipo battery

Capacity: 250mAh
Voltage: 3.8V
Continuous discharge rate: 30C
Instantaneous discharge rate: 60C
Size: 55x12x7mm
Weight: 13.6g
Connector: PH2.0
 
 
Features:
Betaflight support, multi flight mode: ACRO/AIR/ANGLE.
Powerful brushless motor and smooth ESC. 
CNC aluminum alloy propeller guard. 
Betaflight OSD support, easy to get RSSI, voltage and other info from your goggles.
Adjust the settings and the PID of the flight controller via OSD.
Frsky version support both EU LBT and NON-EU Frsky transmitter.
Flysky version support both AFHDS and AFHDS-2A Protocol Flysky transmitter.
Full telemetry function ready.
Head lights ready.
Camera angle adjustable.
Real Bind and Fly version.
Package included:
 
Basic version
1 x Snapper 6 frame
1 x Crazybee F3 FC (Frsky and Flysky option)
4 x SE0603 KV19000 Motor
1 x 31mm 3-blades propeller set (4cw+4ccw)
1 x AIO camera & VTX
1 x 3.8V 250mah 30C/60C battery
1 x USB Lipo/LIHV charger
1 x Propeller disassemble tool
1 x Screwdriver
 
Standard version
1 x Snapper 6 frame
1 x Crazybee F3 FC (Frsky and Flysky option)
4 x SE0603 KV19000 Motor
1 x 31mm 3-blades propeller set (4cw+4ccw)
1 x AIO camera & VTX
3 x 3.8V 250mah 30C/60C battery
1 x 1S06 6 way Lipo/LIHV charger
1 x Propeller disassemble tool
1 x Screwdriver

,,,,,,,,
Happymodel Snapper6 65mm Micro 1S Brushless FPV Racing RC Drone w/ F3 OSD BLHeli_S 5A ESC BNF    Description: Brand name: Happymodel Item name: Snapper6 FPV racing Drone Wheelbase: 65mm Basic version: with one battery and one USB Lipo/LIHV charger Standard version: with 3 batteries and one 1S06 6 way Lipo/LIHV charger Receiver: Compatible Frsky receiver / Compatible Flysky Receiver / Compatible DSMX DSM2 Receiver Size: 81mm*81mm*36mm
Items  Specifications
SE0603 19000KV brushless motor
Configu-ration: 9N12P
Stator diamter: 6mm Stator length: 3mm Shaft diameter: Φ0.8mm Motor dimension(Dia.*Len): Φ9mm*15.5mm Weight(g): 1.7g No.of cells(Lipo): 1S
 
Crazybee F3 flight controller
Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Board weight: 3.5g Power supply: 1S battery input (DC 3.5-4.35V) Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready Built-in Frsky receiver with telemetry (D8/D16 switchable) Built-in Betaflight OSD (SPI Control) Built-in Current meter Max 14A Built-in 5V 0.8A BEC with LC filter Built-in voltage detection BLHELI_S pass-through ready Heading LED ready
 
BLHeli_S 5A 4 in 1 ESC
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_L_5_REV16_6.HEX Default protocol: DSHOT600
 
Frsky receiver version
SPI BUS receiver
Frsky D8/D16 switchable Compatible both of Non EU and EU LBT transmitter Channels: 8ch or 16ch Failsafe support No ground interference (Transmitter and receiver 1m from the ground): 300m
 
Flysky receiver version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference (Transmitter and receiver 1m from the ground): 300m Failsafe support
 
AIO Camera & VTX
Output power: 25mw
Frequency: 48CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 6 bands 48 channels With raceband: 5474 5945 MHZ Size: 13.9"12.0mm (L*W) Weight: 3g
 
3.8V 250mAh Lipo battery
Capacity: 250mAh
Voltage: 3.8V Continuous discharge rate: 30C Instantaneous discharge rate: 60C Size: 55x12x7mm Weight: 13.6g Connector: PH2.0
 
  Features: Betaflight support, multi flight mode: ACRO/AIR/ANGLE. Powerful brushless motor and smooth ESC.  CNC aluminum alloy propeller guard.  Betaflight OSD support, easy to get RSSI, voltage and other info from your goggles. Adjust the settings and the PID of the flight controller via OSD. Frsky version support both EU LBT and NON-EU Frsky transmitter. Flysky version support both AFHDS and AFHDS-2A Protocol Flysky transmitter. Full telemetry function ready. Head lights ready. Camera angle adjustable. Real Bind and Fly version.
Snapper 6 65mm 1S FPV racing drone flysky BNF Manual

Snapper 6 65mm 1S FPV racing drone frsky BNF Manual

 
Package included:
 
Basic version 1 x Snapper 6 frame 1 x Crazybee F3 FC (Frsky and Flysky option) 4 x SE0603 KV19000 Motor 1 x 31mm 3-blades propeller set (4cw+4ccw) 1 x AIO camera & VTX 1 x 3.8V 250mah 30C/60C battery 1 x USB Lipo/LIHV charger 1 x Propeller disassemble tool 1 x Screwdriver   Standard version 1 x Snapper 6 frame 1 x Crazybee F3 FC (Frsky and Flysky option) 4 x SE0603 KV19000 Motor 1 x 31mm 3-blades propeller set (4cw+4ccw) 1 x AIO camera & VTX 3 x 3.8V 250mah 30C/60C battery 1 x 1S06 6 way Lipo/LIHV charger 1 x Propeller disassemble tool 1 x Screwdriver
,,,,,,,,